Build a USB Digital Microscope in 60min and 15$

Step 3 Remove the insolation from the cable & add a red and white wire.

Use a cutter or a small knife to remove the isolation (BE VERY CAREFUL - DO NOT CUT YOURSELF!)
Cut the red and black wires and reveal the copper wiring .
Connect two additional extensions for these cables (5V DC) and solder the red together and the blacks together (not red to black!)

Comments

[kitfoxtrot]

In bold @ the top of step III it says "...add a red and white wire."

Should be red & black as I'm sure you know :p

[mzclive]

lol Forget cutting myself, I've managed to solder myself once. =)

[codongolev]

once I dropped my soldering iron.... then I caught it..... :P

[codongolev]

(in case you didn't catch that, I mean I just caught it as a reflex and grabbed the business end.)

[codongolev]

uhh... you mean "insulation"?