Print PDF
Favorite
Email
Step 9Build Adjustment Lock Collar
In this step we'll build the adjustment lock collar for the spring...
a. Drill and tap a hole in the center of the brass 3/8 pipe coupler, using a 1/4-20 tap (Image)
b. Thread in the adjustable table leg foot and place over the spring and cinch (Image)
a. Drill and tap a hole in the center of the brass 3/8 pipe coupler, using a 1/4-20 tap (Image)
b. Thread in the adjustable table leg foot and place over the spring and cinch (Image)
| « Previous Step | Download PDFView All Steps | Next Step » |
 |
Add Comment
|
