Print PDF
Favorite
Email
Step 2Disassemble and Cut Frame
Strip your donor bike down.
If you are careful with the source bike you select, you should only have to cut the frame in three places.
*where the top-tube hits the seat tube
*where the bottom bracket and chain stays intersect
*where the seat tube and the bottom bracket intersect
If your donor bike top tube doesn't match up with the 3/4" conduit well, you will just want to remove the top tube entirely and replace it. Try to avoid this as it makes things trickier.
If you are careful with the source bike you select, you should only have to cut the frame in three places.
*where the top-tube hits the seat tube
*where the bottom bracket and chain stays intersect
*where the seat tube and the bottom bracket intersect
If your donor bike top tube doesn't match up with the 3/4" conduit well, you will just want to remove the top tube entirely and replace it. Try to avoid this as it makes things trickier.
| « Previous Step | Download PDFView All Steps | Next Step » |
 |
Add Comment
|
