loading
Sometimes when you are sitting at your work bench you decide you need to clean up all the loose nuts lying around. This little tool is for putting those loose nuts where they belong.



To build:
1. get tape, allen wrench, two nuts that will fit on the allen wrench, and a ball point spring
2. put a little tape on the small end of the allen wrench
3. put a nut, then the spring then a nut on the long end of the wrench
4. pull back on the nut closest to the end of the long end of the wrench, aim and let fly

Range is about 10 meters. Don't shoot it at any living thing, it hurts.


 
<p>cool vary fun way of cleaning up all those nuts after project to shoot em into a bin of nuts and hear that satisfying clink in the bin and feeling like your a sharp shooter pro for getting a long shot!</p>

About This Instructable

678 views

5 favorites

License:

Bio: I am an American teaching English at Shangluo University, Shaanxi. I like making machines that do interesting but fairly useless things - I call them Quixotic ... More »
More by JimRD: How to Self Balance a Structure or Vehicle with a Gyroscope Goosestepping Robot Version 2 Electromagnetic Spinning Top
Add instructable to: