Print PDF
Favorite
Email
Step 4Join a Tube from the Nozzle Into the Case
We need to be able to connect the small hole in the Nozzle into the inside of the Case. Cut a small (1-1/2 inch long) piece tubing that fits the inside of the Nozzle. Cut two slots about 1 inch long into the case in front of the Nozzle. Make them about 1/4 inch apart. (see Pics) Cut at each end of the slots to form a rectangular hole. This hole will accept the extension tube and allow it to go inside the case. Insert extension tube into both Nozzle and CD Case and hot-glue into place. Cut the tube flush with the inside of the Case when the glue is cooled. You should get something like what the pictures below show.
A Later Note: My newer instructable makes the nozzle install process much easier!
A Later Note: My newer instructable makes the nozzle install process much easier!
| « Previous Step | Download PDFView All Steps | Next Step » |
 |
Add Comment
|
