Print PDF
Favorite
Email
Step 16Pin 12, Capacitor to Negative
We now need to somehow use a capacitor to connect Pin 12 to the negative rail. Only this is a long jump.
In the picture below I used a jumper to go from Pin 12 to the other side of the board. I then connect a 0.01uf capacitor to negative.
(You can do this several ways, I did this to keep the positive rail on one side and the negative rail on the other.)
In the picture below I used a jumper to go from Pin 12 to the other side of the board. I then connect a 0.01uf capacitor to negative.
(You can do this several ways, I did this to keep the positive rail on one side and the negative rail on the other.)
| « Previous Step | Download PDFView All Steps | Next Step » |
 |
Add Comment
|
