Instructables

Build an Infrasonic Subwoofer

Featured

Step 6: Cabling

Picture of Cabling
Infrasonic_sub022.JPG
Infrasonic_sub017.JPG
Infrasonic_sub025.JPG

Now once you have tested and solder together your cabling install l all the cabling, solder the speakers, cut holes to the exact size of the speakon jacks + corresponding panel. Then test all the wiring by running sine tones through the input again. At this point you may want to add wooden or metal handles to the side of the Subwoofer because its heavy and awkward to lift!! Ours was close to 70lbs. 


 
Remove these adsRemove these ads by Signing Up