With Instructables you can share what you make with the world and tap into an ever-growing community of creative experts.
Hi! After a kabillion requests, here you go! This robot is running the EZ-B available at http://www.ez-robot.com First a little introduction, watch t...
Okay hopefully you've created a nice work area. Someplace with a table/bench that you don't mind getting dirty/burning/scratching/etc. (ie don't use y...
Using your screw driver set, you'll want to disassemble the entire toy. Keep track of how it came apart, because the goal is to re-assemble :) .. *No...
You'll need to mount the servos onto the top part of the toy's case. This is going to be your first modification to the body. Hold the two mid sized s...
The neck will mount to the GWS Standard servo. This will allow it to move left and right. *Note: Like the arms, the servo needs to be centered ;) I ...
Now let's give wall-e some wheels! So the toy doesn't have any motors or drivetrain. It's a push toy. So you'll need to be very confident and creativ...
Okay now we're going to mount the drivetrain to the case. This is exciting becuase it's a lot of dremeling! Take a good look at the pictures and see...
I supposed you'll want your wall-e to see. So did i! So I used one of the sharp distance sensors mounted on his neck. I had to dremel a bit of the se...
Nothing makes Wall-e come more alive then his eye tilting. It adds a lot of character to his personality. The eyes of the toy is tiltable by hand, ...
This part isn't the most difficult because I am using the EZ-Robot project. It is a robot controller board that connects to your computer over bluetoo...
In autonomous mode, my Wall-e creates a 2 dimensional map of objects around him. This prevents him from getting stuck or backing into objects. The the...
Because my wall-e does have 6 servos and a microcontroller, his power consumption is high. Due to size constraints, i was limited to a small batter...
I hope you enjoy your new robot. For more information about my projects and robots, please feel free to visit my website at http://www.dj-sures.com/ro...
Remove these ads by
Signing Up
PDF Downloads
As a Pro member, you will gain access to download any Instructable in the PDF format.
You also have the ability to customize your PDF download.
Visit Our Store »
Go Pro Today »
totally..
i m ur fan nw!!