Introduction: Build the BT_SmartCar With 3DP & Arduino(用3D列印和arduino製作藍芽智慧小車)

This my BT_smartCar ,I builded it with 3D Printer & Arduino.It have 3 function modes.A Andorid phone controlled mode.B Auto mode.C Trace mode.

Step 1: HW/SW Design Section

Step 2: Mechanism Section

Below is about 3DP elements download & assembly.

http://arbu00.blogspot.tw/2015/10/build-btsmartcar-with-3dp-arduino.html

Comments