With Instructables you can share what you make with the world and tap into an ever-growing community of creative experts.
A few months ago, I saw an instructable by fjordcarver on how to build a coloursensor with an RGB led and an LDR. It inspired me to try whether I c...
Colour is nothing more than different wavelengths of light that are reflected by objects. Each material will reflect a different combination of wavele...
We actually don't need a lot for this project: An attiny85 An RGB led (4-pin PLCC) An LDR A 10K resistor A 220Ohm resistor a ...
The circuit is pretty similar to Fjordcarvers original design. The only exception is that I used an LED with common anode, instead of a common cathode...
I was looking for a bootloader on the internet and after a long night of searching, I found a folder named tinyload3 with a bootloader, build by Peter...
To do the colour sensing, I basically used Fjordcarvers code without any modifications. I only translated it to bascom and added serial communication ...
Remove these ads by
Signing Up
Not NiceInappropriateSpam
PDF Downloads
As a Pro member, you will gain access to download any Instructable in the PDF format.
You also have the ability to customize your PDF download.
Visit Our Store »
Go Pro Today »