Print PDF
Favorite
Email
Step 3Making the 2 disks of the turbine
Take 2 pieces of waterproof plywood ( 12 mm )
Measure in 2 directions to get the middle of the plate and mark that point.
Take your compass and make a circle of 40 cm diameter.
Grab your jigsaw and cut them out.
Measure in 2 directions to get the middle of the plate and mark that point.
Take your compass and make a circle of 40 cm diameter.
Grab your jigsaw and cut them out.
| « Previous Step | Download PDFView All Steps | Next Step » |
 |
Add Comment
|
