Introduction: Building an Arduino Shield for the NRF24L01+ Transceiver

Picture of Building an Arduino Shield for the NRF24L01+ Transceiver

The nRF24L01+ Transceiver is a great low cost way to add wireless capability to any project. But the down side of the nRF24L01+ is it can be a hassle to prototype with. In this instructable we look at how to build an Arduino shield and a mini proto board for the nRF24L01+. You can also purchase the shield and mini proto board covered in the video at www.forcetronics.com. To access the Arduino code from the video go to my blog at http://forcetronic.blogspot.com

Comments

acboother (author)2015-10-22

Is this an Instructable? Where are the instructions?

ForceTronics (author)acboother2015-10-22

Hello acboother, Thanks for the feedback. In the video I go over the design, the tools I used, and give you access to the PCB files and example code. I will try to have more detailed step by step instructions in my next instructable. If you have a specific question on this particular instructable let me know.

About This Instructable

1,324views

22favorites

License:

More by ForceTronics:Removing Solder Bridges on Small PinsAnalog Sensor Signal Conditioning CircuitHow to Get More Functionality Out of Your Arduino Zero
Add instructable to: