With Instructables you can share what you make with the world and tap into an ever-growing community of creative experts.
A few summers ago, I decided to try to make an upright bass. After building one using a tin bucket as the body (from a blueprint I found online) I wa...
The wheelbarrow I used as the body is a large metal True Value wheelbarrow. I used 1/4" plywood as the front cover, and I made the neck out of three ...
I cut the face plate out of a 4'X4' piece of 1/4" plywood by laying the wheelbarrow open-side down on the plywood and tracing the outline. I used a d...
Since I have neither the skills nor the tools to make a neck using one big solid piece, I made it by gluing together three separate pieces. As you ca...
With these pictures you can get a better idea of how the neck/headstock pieces came together. I used wood putty to smooth over the seams where the th...
After I glued on all the parts, I used wood putty to smooth over rough spots and give the bass a more "finished look." After sanding down the wood pu...
Remove these ads by
Signing Up
Not NiceInappropriateSpam
PDF Downloads
As a Pro member, you will gain access to download any Instructable in the PDF format.
You also have the ability to customize your PDF download.
Visit Our Store »
Go Pro Today »