Step 8: Gas cowling - 6
Fully weld all tacked joints
- Stitch weld in short sections to prevent warpage. But make sure to fully seal all joints
- Weld ONLY on the underside of the flange ring. No welding on the top joint side of the flange
- Be careful to not warp the top flange when welding the gas outlet into place
- Grind top surface of flange flat after welding
- Clean up flange holes with a 11/32" drill
Remove these ads by
Signing UpFlag this comment as:
Not NiceInappropriateSpam
Visit Our Store »
Go Pro Today »
