Building the Mongoose Mechatronics Robot: Part 1 Chassis & Gearbox

Step 4 Chassis & Gearbox

First we'll build the Right side chassis and gearbox assembly.

• Using a single silver 10mm self tapping screw attach the Aluminum Right side Chassis half to the Right Gearbox (T3) cover, do not tighten it yet (leave about a full turn loose).
• Install two brass bushings into the Right Gearbox assembly (as seen in the second image)

Repeat this step for the left side chassis

Note: in the illustrations the Chassis is drawn in green for clarity (it's actually black in the kit).