Introduction: K'nex Bullpup Pistol/shotgun

Picture of K'nex Bullpup Pistol/shotgun

Hi, this is my first instructable so i thought i would start with something simple.

Pros:
-Comfortable.
-Sturdy.
-Definitely not ugly :D
-Fun to use.
-Has never jammed on me.
-Dosent use many pieces.
-Cool tip on last step.

Cons.
-Not the most powerful pistol here.
-Two broken pieces.
-Trigger is too far forward.

Lets get going!

Step 1: Parts List

Picture of Parts List

Now you will find out if you have enough pieces.

Rods:

69 x green
39 x white
1 x black (or gray but black is better)
1 x yellow

Connectors:

1 x red(can be substituted for just about anything)
5 x green
13 x white
25 x yellow
1 x light grey
6 x orange
5 x dark grey

Misc.:

1 x hinge
1 x metallic blue clip
8 x small black wheels(optional)
8 x blue spacers
a few x elastic bands
2 x broken orange connectors

Got those?, if so lets get going!

Step 2: Trigger

Picture of Trigger

1.make this

Step 3: Main Body

Picture of Main Body

1.make this.
2.make this.
3.make/gather these.
4.add the trigger and the things from step 3.
5.add the other side.
6.add the elastic bands.


Step 4: Ram/mag Pusher

Picture of Ram/mag Pusher

1.make this.
2.make this.

Step 5: Black Wheel/elastic Band Placement

Picture of Black Wheel/elastic Band Placement

1.add mag pusher and elastic band.
2.add ram and elastic band.
3.add there, put through the hinge hole.
4.add black wheels if you have any.

Step 6: Your Finished!

Picture of Your Finished!

Your probably wondering why I called this gun a pistol/shotgun.
Well, I did it because if you pull the ram back once, it will fire 1 orange connector, if you pull it back twice, it will fire 2 and if you pull it back 3 times it will fire a maximum of 3 orange connectors.
So, its sort of a shotgun!.
I hope you have fun with this gun!

Comments

~KGB~ (author)2011-05-24

not bad at all =D

xXFor_The_WinXx (author)~KGB~2011-05-25

Thanks!

~KGB~ (author)xXFor_The_WinXx2011-05-25

np =D

master-splinter306 (author)2015-09-01

Nice!

DJ Radio (author)2011-05-24

Terrible design. In addition to what Killer~safecracker said, putting the mag behind the trigger makes it much worse.

xXFor_The_WinXx (author)DJ Radio2011-05-25

I agree up to a point, if you load 3 bullets in to it its as if the trigger is where the magazine is.
Anyway, i will improve the trigger design on my next gun.

SLDxRaPiiDZz (author)2011-05-24

Nice first gun!

Thanks!

beanieostrich (author)2011-05-23

This is pretty good, especially for a first posted gun =D 4.5*

Thanks!, im glad you liked it

No problem =D But I do agree with K~SC too.

I will improve it on my next gun XD

Nice =D

Killer~SafeCracker (author)2011-05-23

Never never never never never put a trigger that far forward! There are lots of ways to get a trigger farther back than that. Anytime you have the bullet before the trigger you loose a ton of power. Add the trigger placement like that you're lucky to get 10 feet.

Thank you for a constructive comment, on my next gun i shall improve the trigger placement.

No problem! If ya need any help on future guns just post on my orange board.

Thanks for the offer, if i ever encounter a problem i will do that :D

About This Instructable

660views

3favorites

License:

More by xXFor_The_WinXx:K'nex bullpup pistol/shotgun
Add instructable to: