Introduction: Button Battery Flashlight

Picture of Button Battery Flashlight

To make this flashlight you will need a soldering iron, solder, a 3v battery and a LED.

Step 1: Step One

Picture of Step One

conect the LED find out wich way it waorks then solder one end to the battery like shown

Step 2: Step 2 Done

Picture of Step 2 Done

your done pinch it to turn it on you may have to bend it around a bit pretty self explanatory though 

Comments

airbourned (author)2011-08-03

I'm not trying to be mean, but I can't see practicality in this as a flashlight. There is no switch to turn it on/off, no ability to replace the battery, and although it's possible to solder directly onto a battery's +/- terminals, it seems inherently dangerous.

vishalapr (author)2011-07-06

Awsome rated 4.5*
Have a look at my ibles as well!!
Rate and comment and vote my ibles if you liked em!;)

About This Instructable

885views

4favorites

License:

More by grumpyfam25:Button battery flashlighthow to make a duct tape laptop bag
Add instructable to: