Introduction: Buzz Lightyear Mini Replica (Toy Story)
http://www.youtube.com/watch?v=4nWuoT-Tw1s&feature=plcp&context=C442e1ecVDvjVQa1PpcFMPCCdrGRKVijc1uzW4C0ZE_GMiclsjBG4=
The second image is my old buzz
Step 1: The Spaceship Box
The spaceship was edited on microsoft paint, everything moded to make the box look accurate and have buzz fit inside. feel free to use for any small buzz figure or re-size to fit the Disney store buzz
Step 2: The Templates That Were Used
The old images I used didn't work out well. So I found these images on the internet. the only templates that were still used were the feet
Step 3: The Instruction Manual
For the instruction manual It was difficult to find all the pages, until I managed to come across images on a review on the Chogokin Buzz Lightyear figure. Again the images were formatted to fit and make straight adjustments. Feel free to use for any small buzz or your Toy Story Collection Replicas on Pixar Planet
Step 4: Instructions for Printing Manual
print the manual double sided, but be careful not to cut any text off
Step 5: Out With the Old in With the New !!!
Here's a comparing of the old buzzes over months. overall the newer buzz I made is much better than before. Also I don't pose him that much so this is NajmyMan100 saying "To Infinity And Beyond"
Step 6: To Infinity and Beyond!!
I add rubber bands around his shoulders to mimic the black rubber around the shoulders.
Step 7: New Wing Mechanism
I modified the wing pack mechanism to be similar to the F-Toys toy story real figure from Japan. I also added a new box
Step 8: Pictures Just for Fun
Step 9: And I Forgot
the helmet, face,feet and armor is used from this buzz figure from Hong Kong