Introduction: CASV M4A1 Instructable

Picture of CASV M4A1 Instructable

Step 1: The Body

Picture of The Body

Step 2: The Handle

Picture of The Handle

Step 3: The Barrel

Picture of The Barrel

Step 4: The Stock

Picture of The Stock

Step 5: The Mag

Picture of The Mag

Step 6: Extras

Picture of Extras

Step 7: Assembly

Picture of Assembly

Step 8: Banding, Loading and Firing!

Picture of Banding, Loading and Firing!

Step 9: Done!

Picture of Done!

that's it. your done. to fire put a rod in the mag, magpusher in, pull the firing pin and pull the trigger!

have fun with your gun.


kwintisolo12234 (author)2011-04-25

i cant choose between building this one or selezionas xm8.
which one should i build?

kwintisolo12234 (author)2011-04-24

does this uses any broken parts?

rootbeer96 (author)2010-10-05

one more thing explain the barrel a little more and if the range is 20 feet or more 5 stars ***** count them five 1* 2* 3*4*5* if less like around 15-20 feet still 5 stars by far one of the best looking guns on this sight. and one more thing how many green rods are in this gun.

tthomasvd (author)rootbeer962010-12-27

u mean SITE not sight i think??

rootbeer96 (author)tthomasvd2011-02-15

ok thats what i meant

Brammetje (author)rootbeer962010-10-08

I don't now it's already took apart so I don't now

rootbeer96 (author)Brammetje2010-10-09

it sucks the bullet does not even leave the barrel

Brammetje (author)rootbeer962010-10-10

I don't now what you did but mine worked realy great

DracoUltima (author)2010-12-09

People.....just so you know, the creator of this gun probably did not intend to make this for performance, most likely for looks. Do not hate on it because it's performance is not that good. If you want to post a criticizing comment on this gun, create an m4a1 and post it (it better be good) before blurting out crap about someone's gun.

fuzi (author)2010-08-21

range pleeze

rootbeer96 (author)fuzi2010-10-05

add the rang please cause i will build and tell every on if the range sucks or not

The Jamalam (author)2010-08-29

Awesome, where did you get the yellow 3d connectors from? (4th pic on step 1)

Brammetje (author)The Jamalam2010-09-01

I dont now. I was making this gun an than I saw it and I thought that it looks cool.

~KGB~ (author)2010-08-23


TwistedParadox (author)2010-08-21

Is that stock take-off-a-ble

Brammetje (author)TwistedParadox2010-08-22

Yes you can take the stock of.

Brammetje (author)TwistedParadox2010-08-21

what do you meen?

he means can you take the stock off

yeah that one

shadowninja31 (author)2010-08-21

Good job! I think that this is one of the better ones on here. I would mod it a little though.

MegaMetal8 (author)2010-08-21

Thats well good 5*

About This Instructable




More by Brammetje:My Bushmaster ACRCASV M4A1 instructableCASV M4A1
Add instructable to: