Print PDF
Favorite
Email
Step 2Cutting the material
Cut and measure a rectangle out of the Peltex, 2 rectangles out of the iron-on adhesive and 2 rectangles out of your fabric that are 13 inches by 6 inches. Put aside.
Cut 2 strips of Velcro each 18 inches.
Cut 6 rectangles out of your fabric that are 10 inches by 6 inches.
Stack the 6X10 rectangles of fabric on top of each other making sure all pieces of fabric are right sides up.
Measure one long side and mark at 4 1/2 inches. Measure and mark the other long side at 5 1/2 inches long. Connect these 2 marks and cut along your mark.
You should now have
2 strips of double sided Velcro, 18 inches in length
2 fabric rectangles that are 6"X13"
1 Peltex rectangle that is 6"X13"
12 fabric trapezoids that measure 6" wide and 4 1/2" high on one side and 5 1/2" high on the other side.
Cut 2 strips of Velcro each 18 inches.
Cut 6 rectangles out of your fabric that are 10 inches by 6 inches.
Stack the 6X10 rectangles of fabric on top of each other making sure all pieces of fabric are right sides up.
Measure one long side and mark at 4 1/2 inches. Measure and mark the other long side at 5 1/2 inches long. Connect these 2 marks and cut along your mark.
You should now have
2 strips of double sided Velcro, 18 inches in length
2 fabric rectangles that are 6"X13"
1 Peltex rectangle that is 6"X13"
12 fabric trapezoids that measure 6" wide and 4 1/2" high on one side and 5 1/2" high on the other side.
| « Previous Step | Download PDFView All Steps | Next Step » |
 |
Add Comment
|
