I programmed this file in alpha cam using solid surfaces. This dragon was intended for a bed project. The STL file is way too big to upload.


I ran the dragon on my spare time it took about 3.5 hrs.
<p>please send the stl file to me </p><p>NickGraham1111@gmail.com</p>
<p>That's just plain cool.</p>
<p>Hi, very nice, could I get that file to? giorgio@polodude.be</p>
<p>Could I get that file from you as well? matt63031@gmail.com</p>
thank you <br>this is beautiful <br>could you please send me the STL file or link <br>thanks <br>hkehne@gmail.com
very cool, what was this cut with?
an andi exx51 and down shear router bits
nice work!
Thank you!
You could upload this to http://www.thingiverse.com/ <br>and then post a link, It worth a look, if you've not see the site.

About This Instructable




Bio: I was a chef for 14 years, Was Gainfully unemployed for a year doing side projects and carpentry work. Now I work for myself doing ... More »
More by HandyLandy:Inlay a Wood FloorLittle Zombie RoseCNC Routed Cribbage Board
Add instructable to: