Print PDF
Favorite
Email
Step 8CNC Stomp Pad 8 | Sanding & Spikes | CNC Videos Tutorial | G-Code Programming | CAD/CAM Tutorial
CNC Stomp Pad 8 | Sanding & Spikes | CNC Videos Tutorial
During this CNC Video Segment we sand our CNC Stomp Pad with a Dual Action (DA) sander. We are taking out any deep scratches and giving it a matte finish. The CNC Plasma Cut part then is taken over to a stand.
We look at different traction spikes and how they will look. After selecting a spike type, we start laying them out. We layout some marks where we will drill holes in the next video.
Thanks,
Ivan Irons
Learn CNC Tutorials
Machining Information
http://www.cncinformation.com
http://www.cncinformation.com/CNCBlog/
During this CNC Video Segment we sand our CNC Stomp Pad with a Dual Action (DA) sander. We are taking out any deep scratches and giving it a matte finish. The CNC Plasma Cut part then is taken over to a stand.
We look at different traction spikes and how they will look. After selecting a spike type, we start laying them out. We layout some marks where we will drill holes in the next video.
Thanks,
Ivan Irons
Learn CNC Tutorials
Machining Information
http://www.cncinformation.com
http://www.cncinformation.com/CNCBlog/
| « Previous Step | Download PDFView All Steps | Next Step » |
1
comment
|
Add Comment
|
Oct 11, 2011. 9:10 AMkeebler2201
says:
Great tutorial! I'm interested in doing something similar and wonder if there's an online retailer you could recommend that sells traction spikes similar to yours?
Reply
 |
Add Comment
|
