Print PDF
Favorite
Email
Step 9CNC Stomp Pad 9 | Drill Holes | CNC Learning Videos | G-Code Project | CNC Programming Video | DIY CNC
CNC Stomp Pad 9 | Drill Holes | CNC Learning Videos
In this video we drill the holes in our CNC Stomp Pad. We need to add the traction spikes and they are really a screw and nut. We drill the holes then clean them out.
We bend the stomp pad while drilling and we must hammer it flat next.
A quick DA Sanding to make the pad look good, then we are on the the next step which is finalizing the CNC stomp pad.
Thanks,
Ivan Irons
Learn CNC Tutorials
Machining Information
http://www.cncinformation.com
http://www.cncinformation.com/CNCBlog/
In this video we drill the holes in our CNC Stomp Pad. We need to add the traction spikes and they are really a screw and nut. We drill the holes then clean them out.
We bend the stomp pad while drilling and we must hammer it flat next.
A quick DA Sanding to make the pad look good, then we are on the the next step which is finalizing the CNC stomp pad.
Thanks,
Ivan Irons
Learn CNC Tutorials
Machining Information
http://www.cncinformation.com
http://www.cncinformation.com/CNCBlog/
| « Previous Step | Download PDFView All Steps | Next Step » |
 |
Add Comment
|
