video CR-Tutorials Redo-How To Make A Hidden Blade
Adam redoes How To Make A Hidden Blade with a simpilar design

Visit our site at CRTutorials.co.nr

Please subscribe,add us as friends,tell a friend,leave a comment,rate this video and keep on watching
1-40 of 43Next »
Hey how do u make the ring mechanism? I've been trying to figure it out.

Yea me too

alcemy_FTW4 years ago
wonderful, but i have one question, how do you get it to stay in when not in use
yo dude not bad
(YOUR N4 years ago
hi u look like a nuinja turtlees
Im almost done mine.. it has 2 locking mechanisms and it is spring loaded with a ring trigger attached to your hand or your pinky or middle finger check it out.. in like..... 10 days...
peace out,
ilebos75 years ago
this is lame video
koilu ilebos74 years ago
this video is nice
joshgrey5 years ago
 while making mine im trying to put a small pulley along it atatched to the blade and the back of my two middle fingers , so when i flex my writs backwards the bade comes out ... then theres no danger of it cutting my hand or wrist lol
just get a ring and tie wire to it and attach that to your pulley
nice hidden blade
looks like a decent hidden blade
ty10115 years ago
 how do you get the rail to lock in at the top?

thanks,so much

lop1455 years ago
i'm making the asassins creed 2 hidden blade with the litlle flintlock gu attatched.
blade is going to be spring loaded and i'm making a pin that holds it back pin will be attatched to a thumb ring so just stretch your thumb and *shing* :)

Holy shiz! That's intense. Wish you best of luck with that. Just don't blow your arm off or anything. I think I'll just stick with the blade. lol
Branman lop1455 years ago
cool. make an instructable i'd like to see that.
no, dont. you have to make it so you need to flick your wrist back, because then if you you accidentally pull your thumb out with your wrist bent down, you'd slice your wrist open and all your blood will be on the floor in five minutes.
why not make a sheath? thats how they did it in ac2. the sheath would hit the fingers instead, moving them out of the way for the blade.
 because its insanely complex, and makes the blade wobbly.
true but maybe if you made a saftey button/switch like a firearm
lop145 Branman5 years ago
like this?

assasins creed hidden blade.bmp
ilovegm5 years ago
Someone should make one that doesn't retract on impact, maybe with a secondary locking mechanism after the blade is sprung...
Someone has. I plan on making one myself and asking the origional creator if i can put the tutorial up on here. If you are interested, check out this Link
you may have to register to view the thread, but it is sooo worth it.
Keep me informed :D
If you put the tutorial up.

Agreed, registering was totally worth it, although it seemed like a shady website at first.
Zwilliamo5 years ago
 pretty nice way of doing it, but why does everyone have it on the wrong arm?
kelleyn20065 years ago
great video I dont doubt that...only concern are the awkward silence bits and pieces, just suggesting make a script to keep you on track :)
rorpen6 years ago
Amazing!!! I want one! Where can you get the slidey bit and envelope knife?
Capt. Kidd6 years ago
better: find otf w/ long blade stick in sleeve
I had an idea from the first one. the Russian special forces have a weapon called the ballistic knife (google it). make a ballistic knife
mhippo6 years ago
To eliminate the need to swing, you need to make it spring loaded, with a catch you can release with the same hand.
sence u suggested it u should build it and post the instructible
If and when I decide to make it, I'll probably not take the time to post it as a full-fledged instructible. at most I'd post it here as a comment
i can see a catch breaking and a spring loaded knife in someones wrist here
culon_3006 years ago
jaja nice job man,now just cut one of your fingers and you are complete
otacon82566 years ago
indymogul.com had a really cool spring loaded device that uses the same type of rail, and you don't have to flail your arm around to extend the blade (indymogul used a prop gun but a blade could easily be substituted)
what was the episode called? i cant seem to find it on here youtube or indymogul
cokalola6 years ago
i think you can put some lubricant on the sliding thingie_ hoped this helped
I used a homemade leather bracer, added on the rail sharpened with my rock grinder, polished it up, slightly dented the end so it locks, and added another layer of leather over it, no glove, and it doesnt scratch your arm (i also put it on the top of the hand, Its alot cooler from my view)
drats6666 years ago
You might want to ground out the edge by your elbow joint to a round surface because a square or rectangle shape will aggrivate and possibly scratch your arm. that and possibly attach a cushion to that edge. also for attaching the blade to the rail I used a rivet gun and just rivited it. also i used a rivet for attaching it to the glove. I went and modified mine so it uses a spring rail system and the spring is triggered by a pole or rail that is triggered by shifting my thumb down. this way it shoots out once i trigger it much like the game. just make sure not to accidently trigger it because the spring loaded system can puncture skin even with a dull unsharped edge.
1-40 of 43Next »