Print PDF
Favorite
Email
Step 22Motor assembly
You will also need to take the motor off the test rig and reassemble to fit the J-channel rails.
The new 1-1/2" wheels are just pressed onto the motor shaft. The whole thing is held together with a hose clamp.
I've shown the assembly clamped together on its own, but you will acutally need to assemble this directly onto the J-channel rails. But this takes two hands, so I didn't get a picture!
The new 1-1/2" wheels are just pressed onto the motor shaft. The whole thing is held together with a hose clamp.
I've shown the assembly clamped together on its own, but you will acutally need to assemble this directly onto the J-channel rails. But this takes two hands, so I didn't get a picture!
| « Previous Step | Download PDFView All Steps | Next Step » |
 |
Add Comment
|
