Print PDF
Favorite
Email
Step 25Attach the claw
I attached the claw to the wooden spindle like this -
- tie a loop of wire to the claw
- tie a string to this loop
- drive a short screw into the wooden spindle
-tie the string to the srew in the spindle
I ran the power down to the motor with a seperate cable.
- tie a loop of wire to the claw
- tie a string to this loop
- drive a short screw into the wooden spindle
-tie the string to the srew in the spindle
I ran the power down to the motor with a seperate cable.
| « Previous Step | Download PDFView All Steps | Next Step » |
 |
Add Comment
|
