Print PDF
Favorite
Email
Step 4Creating a Template for the Clear Lexan Face
To keep the knives in the block and protect the blades, I made a lexan faceplate that attaches to the block. This can also support the block if you just want to stand it up on the countertop.
1. Create a cardboard mockup of the faceplate. This will be used as a design stencil for the final lexan faceplate.
2. Test fit the cardboard mockup in order to see how well it works. The little tabs will be the screw points underneath the block.
1. Create a cardboard mockup of the faceplate. This will be used as a design stencil for the final lexan faceplate.
2. Test fit the cardboard mockup in order to see how well it works. The little tabs will be the screw points underneath the block.
| « Previous Step | Download PDFView All Steps | Next Step » |
 |
Add Comment
|
