Print PDF
Favorite
Email
Step 5Making the Lexan Face
The cardboard mockup is used as an outline on a flat piece of lexan.
1. Cut the lexan out to match the cardboard mockup shape
2. Bend the lexan using a heat gun. There are other good instructables on how to bend lexan with a heat gun, so I won't go into any details about this.
1. Cut the lexan out to match the cardboard mockup shape
2. Bend the lexan using a heat gun. There are other good instructables on how to bend lexan with a heat gun, so I won't go into any details about this.
| « Previous Step | Download PDFView All Steps | Next Step » |
 |
Add Comment
|
