With Instructables you can share what you make with the world and tap into an ever-growing community of creative experts.
Feeling dull and dreary on your Monday morning, looking for a pick-me-up to make you feel sassy and smart? Look no further! The Caffeinated Coffee Cor...
To make a sassy Coffee Corset, the following materials are needed: dress form hole punch hot glue 3-5 containers of coffee filters 12 oz coffee groun...
Start by wrapping the dress form in saran wrap to protect it from getting wet! Secure it with masking tape to make sure it doesn't come undone.
Using a sharpie, draw out the desired shape that you want for your corset, marking the lines on both the top and bottom of corset, as well as how far ...
Boil a pot of water and let coffee grounds steep in water for thirty minutes. Add lots and lots of coffee filters to the boiling coffee mix and let th...
Mix wallpaper paste according to directions, starting with a small plastic bucket of water and slowly adding the powder and mixing with hands until a ...
Begin by covering each disk of dyed coffee filter with a layer of wallpaper paste and then applying it to the form. Continue to add more and more dyed...
After structure is thoroughly dry, remove from dress form with saran wrap still attached to interior of corset structure. Following the lines you ini...
Apply grommets on either side of center back to make a closure. Decide how many grommets you want your corset to have down the center back, and remem...
This next part requires some finagling and trial-and-error to figure out. Using the heavy paper, make a pattern for the side hip panels. This will inc...
After you’ve made the pattern, remove it from the form and trace two of them onto cardboard. REMEMBER: since they’re going on opposite sides of the b...
Now that the grommets are applied to the corse, put it back on the form and lace it up tight. This helps to keep it in place while we apply the tutu-e...
We have to make lots and lots of ruffles for the side panels. Start by taking un-dyed coffee filters and cutting out a hole from the center of the fil...
Now comes the ruffly fun part! We’re going to start attaching layers of ruffles to the side hip panels, starting from the outer tip and working our w...
As a finishing touch, let’s create a faux-lace detail around the top edge. Taking a doily, place it along the top edge and, using it like a stencil, ...
You now have a super-sassy, caffeinated coffee corset capable of pulling you out of your dull dreary day and energizing you into the super sassy lady ...
Remove these ads by
Signing Up
Not NiceInappropriateSpam
PDF Downloads
As a Pro member, you will gain access to download any Instructable in the PDF format.
You also have the ability to customize your PDF download.
Visit Our Store »
Go Pro Today »