Introduction: Bat Signal

Picture of Bat Signal

Hello guys. It's Marzuk2. Today I am going to show you how to call Batman. You may have seen how they call Batman on the movie. Yes I am going to show you how to make that light. So lets begin..........

Step 1: Things Needed

Picture of Things Needed

The things you will need for this assignment are,

1. Paper

2. Pencil and Eraser

3. A torch light

4. Cardboard

5. Glue

6. A pair of Scissors

7. Ruler

Step 2: Preparing the Batman Logo

Picture of Preparing the Batman Logo

First of all take the torch light and trace the circle on the paper. Then using the ruler, draw a vertical line which bisects the circle into two equal halves. Then draw 4 horizontal lines. Make sure the gaps between the 4 lines are equal. Then you can prepare the logo by seeing the image I gave on the above. Now cut the logo.

Step 3: Cardboarding

Picture of Cardboarding

On the cardboard trace the logo we have just prepared and cut it. Then glue the piece of cardboard on the torch light. And your light is ready to call Batman.


MsSweetSatisfaction (author)2014-11-02

That a nice mini bat signal. The edges turned out nice and clear, well done!

Thank you MsSweetSatisfaction.

About This Instructable




More by Marzuk2:Fire PitHappy Holiday 3D printing ornamentBat Signal
Add instructable to: