Print PDF
Favorite
Email
Step 4Real modification
in this step, you are actually going to modify it.
this process takes patience.
this process takes patience.
| « Previous Step | Download PDFView All Steps | Next Step » |
9
comments
|
Add Comment
|
Jun 16, 2009. 12:57 PMjdsoccer17
says:
no solder? how long should the two wires be?
Reply
31
Jun 16, 2009. 3:59 PMcowscankill (author)
says:
the wires need to be long enough to stick out the casing? it doesn't matter what length you choose. I didn't solder, it would be a good idea to do so.
Reply
Jun 16, 2009. 12:47 PMjdsoccer17
says:
can i light blubs be touching the wires? and attach the wire to what? the solder directly or does it need a different ground?
Reply
Jun 9, 2008. 4:34 AMmikeisawesome
says:
wut metal part
Reply
31
Jun 9, 2008. 8:47 AMcowscankill (author)
says:
the part in the box... the part thought was for support... the part in the first picture...uh, this is a kodak. If you dont have a Kodak camerae it may be different.
Reply
Apr 15, 2008. 3:50 PMKenY
says:
on the pictures that say attach 1 wire here and another there. can u retake the pic. i cant see it. so bury. email me it at digitalphr34k @ hotmail . com
Reply
31
Apr 17, 2008. 2:23 PMcowscankill (author)
says:
just attach a wire to each side of the light bulb
Reply
Apr 18, 2008. 9:17 PMKenY
says:
i meant have that part....
Reply
Apr 18, 2008. 4:18 PMKenY
says:
i dont be that part.... and its a kodak
Reply
31
Apr 19, 2008. 7:02 AMcowscankill (author)
says:
what part are you talking about?
Reply
 |
Add Comment
|
