With Instructables you can share what you make with the world and tap into an ever-growing community of creative experts.
share step-by-step photos with text instructions
share one or more photos in one step quickly and easily
share your how-to video
123D Catch is a new application and service from Autodesk that turns a series of photographs into a 3D model of an object or space. The rig described...
You will need a 3D printer, such as a Makerbot, or access to one via a 3D printing bureau such as Shapeways or Ponoko. You will need to print: 1x l-b...
Take one piece of dowel, and cut it into 2x 4" pieces, and 2x 8" pieces
Mark center of your 12" plank. Attach the L-brace to plank with 4x #8 screws.
Place an 8" dowel in the middle of the 3-brace. Insert the 8" dowel into the top of the l-brace. Insert a 4" length of dowel on to the branches of the...
Attach the casters to the bottom of the plank using 8X #8 screws. Try not to hit the screws that hold the 1-brace in place from the other side.
Put a 2-brace on each end of one piece of 8" dowel (the one that is not in the base). Do not secure it with a screw yet.
Assemble the shaft collars by putting a #8 hex bolt through one side, and secure it with a #8 wing nut (do not tighten). The head of the hex bolt goes...
Attach the collar piece to the end of one of the 36" dowels. Put a shaft collar on the dowel with the collar, and slide it down towards the center
Attach the flange to the 8" x 8" board using 4x #8 screws. Attach the other flange to the 6" x 6" board using 4x #8 screws
Slide one end of the 8" dowel with the 2-braces over the other 8" dowel (in the 3-brace). Put a shaft collar on the dowel with the collar, and slide i...
Remove the 8" dowel from the 3-brace and place it in the flange, secure it with 1x #8 screw. Put a shaft collar over the 8" dowel in the flange.
Put the collar on the end of the long dowel over the short dowel in the flange. Adjust the height of the shaft collar so that the long dowel is level...
Place the other long dowel in the top of the 3-brace, threading it through the loose 2-brace. The main structure should be almost completely assembled...
Place the small platform (with flange) over the short dowel that is attached to the bottom plate
Place a shaft collar on the outside of the long horizontal dowel. Tighten it down to secure the boom. Move the shaft collar that you placed on the boo...
Assemble the camera adapter by putting a #8 hex bolt through the two tabs, and secure it with a wing nut. Attach the camera platform to the camera ad...
Put the camera adapter ring over the main pole (vertical dowel) and secure it by tightening the wing nut.
Congratulations! You have finished assembling the rig. Test it out by pushing the base back and forth, it should orbit smoothly around the platform. ...
Tag files as:
Making a 3D print of a real object using 123D Catch and Meshmixerby gpvillamil
Make a Brass Knuckles Spoon through 123D Catch, MeshMixer & MakerBot.by damonite
Cardboard Sliced Chipmunkby maulik_887
3D scannerby michaelgohjs
Remixing physical objects using 123D Catch, Meshmixer and other toolsby gpvillamil
Crumpled paper 123D Catch & MeshMixerby damonite
Celebrity 3D Models in No Timeby randofo
Spoonhead - 123D Catch to 3D Printby Plarky
Autodesk 3D Photo ブースの作り方by ADSK Japan Makers
Download our new apps for iOS and android!
©Copyright 2013 Autodesk Inc. All rights reserved.
PDF DownloadsAs a Pro member, you will gain access to download any Instructable in the PDF format.
You also have the ability to customize your PDF download.