Camera-rig/Stabilizer for less than 10Euro - Small or big camera

Step 2: Materials

So this are the materials you'll need:
- A Drill
- Drill 5mm, drill 10,5mm (you can use other drills if you use other nuts & bolts)
- Some measurement device
- Aluminum 15cm+13cm+15cm = 43cm (3cm width 2mm thick)
  Aluminum  13cm+13cm+13cm = 39cm (3cm width 2mm thick)
- Some washers
- Nut & Bolt M10 (1cm width)
- 2 x 1/4" camera thread
- 2 rubber seals