With Instructables you can share what you make with the world and tap into an ever-growing community of creative experts.
This is a quick tutorial I wanted to share with you guys. This is a very easy and cheap tutorial that can be done with some basic tools. You can use i...
More pictures at the end of the instructabel
So this are the materials you'll need: - A Drill - Drill 5mm, drill 10,5mm (you can use other drills if you use other nuts & bolts) - Some measurement...
So here are the measurements. It is a little bit oversized in the height but I did this to be able to mount bigger cameras on it as well. Note: The In...
Here's how I've bended the aluminum. I have the luck to still be a student (Industrial Product design and now Industrial Engineering). This means I co...
Here you just drill the big hole for the bolt (on top of the frame) Drill the 2frames in one time to make sure they are nicely centered. 1,5cm width, ...
-Drill a hole, the same way as the one before but with a smaller 5mm drill
Just follow the pictures. I use a rubber seal on the Cameramount thread just because there was to much space without tread left. If I left it like th...
Once the camera is mounted your done with step one, you've just made yourself a frame for your camera to make more stable footage. You can use the cam...
So for me the biggest positive point of this camerarig is to be able to add a lot of stuff on it. Like a microphone or LED Light. So Here is how I've...
This is how you can make your camerarig look more professional. I did it by using some DI-Noc 3M sticker Carbon and some paint You could also just pa...
Some pictures of the finished product - You still have acces to SD card and Battery - You can mount it on a tripod
Remove these ads by
Signing Up
Not NiceInappropriateSpam
PDF Downloads
As a Pro member, you will gain access to download any Instructable in the PDF format.
You also have the ability to customize your PDF download.
Visit Our Store »
Go Pro Today »