Introduction: Camouflage Paintball Hopper
Let start with a basic plain paintball hopper. First your going to need netting and burlap material to make a ghillie for your paintball hopper
List of what you need:
4.camo tape by buck brand
5.hot glue gun and glue
WARNING PLEASE BE CAREFUL USING RAZOR BLADES AND HOT GLUE GUN. IM AM NOT RESPONSIBLE IF YOU GET INJURED DOING THIS INSTRUCTABLE SO USE CAUTION
Step 1: Add Netting First
Start by gluing the netting around the hopper and cut any extra you don't need
Step 2: Add Burlap
Take ten strands to make one group and trust me it takes forever to make a ghillie suit/gun wrap or in this case for a paintball hopper but this one wasn't to bad. I didnt tie the burlap because i want to be able to change the color of the ghillie later on based on the terrain I'm in.
Step 3: Hopper Door
BE CAREFUL USING A RAZOR BLADE. Place the camouflage tape by duck brand on the door of the hopper and CAREFULLY trim with a RAZOR BLADE.
Step 4: Done
Now that your done it should look like this and yes i dont have a scope or a butt stock yet. I been building this tippmann cronus into a sniper paintball gun. It hits hard and is VERY ACCURATE, i love the feel and recoil. Thank you for checking this instructable out please let me know what you think in the comments.