Camouflaged Power-Source Liberator

Step 6 Connect the modified cell phone plug to the device.

This step is easy. There should be two stranded wires running off of the cell phone plug. Look at them. Now, find the unused wall plug on the thing that you are making. Connect one wire from the cell phone plug to one prong of the wall plug and connect the other wire to the other prong.

For now, tape the cell phone transformer to the side of the thing that you are making.

If you were to plug this device into a socket right now, you should have two fully functional wall sockets and a wire dropping down from the modified cell phone plug that should be 5V at 500ma capable of powering an LED (or whatever your device is rated at). I hooked my 5V to some bling. Hook yours up to your own bling.

Check the pictures for verification.

Do not touch live wires or stick your fingers into the sockets. Even the low voltage wires, if they are over 500ma, should be avoided. You probably should not touch live wires at any rating if you are pregnant or have a heart condition. This is coming from someone who has been electrocuted many, many times.

Comments

[qwertyboy]

lol, "bling"

[davidbacsik]

Bling indeed! Very Fly Project.

[nak]

electrocuted and back from the dead!