Print PDF
Favorite
Email
Step 8Install!
Once it is done, you should probably install it. I was thinking that the best thing to do would be to coat the edge of the case with epoxy. You may think about coating the front of the initial junction box with epoxy also. That way it will never come off. Well, not really. But it will take some effort for someone to pull it off. Bring a screwdriver because you may need to pry off the weather covering on the socket that is attached to the building.
I wanted to use this to have a constant source of energy for powering a circuit that would take sensor readings from the environment and transmit them to the internet. I was also considering using it to power a massive work of what kids these days are calling "Electro-graf." Although, I'm not really sure how much of a load conductive paint can handle.
Basically, if you want something powered out on the street, this is a possible solution. However, I under no circumstance advocate the construction or use of one of these devices.
***Construct and use this device at your own risk.***
I wanted to use this to have a constant source of energy for powering a circuit that would take sensor readings from the environment and transmit them to the internet. I was also considering using it to power a massive work of what kids these days are calling "Electro-graf." Although, I'm not really sure how much of a load conductive paint can handle.
Basically, if you want something powered out on the street, this is a possible solution. However, I under no circumstance advocate the construction or use of one of these devices.
***Construct and use this device at your own risk.***
| « Previous Step | Download PDFView All Steps | Next Step » |
1
comment
|
Add Comment
|
Jul 12, 2007. 5:04 PMhondagofast
says:
Theft of services!
Reply
 |
Add Comment
|
