Print PDF
Favorite
Email
Step 5Tray Attachment
The shorter tent poles are the Upper Arms.
1. Find a plastic Molly Lag that can be press fit into the end of the Upper Arms
2. Drive a #10 wood screw into the Molly. Do this a few times. You want the screw to be loose enough to be able to remove and tighten by hand.
When the screw is use to hold the tray, the load on the screw is in sheer so there is no real need to tighten with a screw driver, a clamp load is not required.
Note: picture 3 shows the arms with the stakes stored inside.
1. Find a plastic Molly Lag that can be press fit into the end of the Upper Arms
2. Drive a #10 wood screw into the Molly. Do this a few times. You want the screw to be loose enough to be able to remove and tighten by hand.
When the screw is use to hold the tray, the load on the screw is in sheer so there is no real need to tighten with a screw driver, a clamp load is not required.
Note: picture 3 shows the arms with the stakes stored inside.
| « Previous Step | Download PDFView All Steps | Next Step » |
 |
Add Comment
|
