Camper Radio Instlation

Published

Introduction: Camper Radio Instlation

About: I am a teacher who enjoys environmentally responsible woodworking. Most evenings will find me in the shop working with my now 8 year old son Shay who is both my greatest helper and biggest fan.

So the radio in our 20 year old camper was done and it needed some new tunes.  This is how I went about wiring a modern radio in to the old system AND got some more storage out of the deal!

Share

    Recommendations

    • Woodworking Contest

      Woodworking Contest
    • Make it Move Contest

      Make it Move Contest
    • Oil Contest

      Oil Contest
    user

    We have a be nice policy.
    Please be positive and constructive.

    Tips

    Questions

    2 Comments

    Nice job you could use the space next to it to put a slide out Draw for your CD’s

    I know this is a bit late, but I have read that a 9 volt battery will keep a radio's memory alive when you disconnect a car battery. So, if you put a switch between the trailer battery and radio, you can wire a 9 volt battery connection between the switch and the radio. This will keep the 9volt from trying to power anything else in the camper besides the radio's memory. Then when you reconnect the battery to the camper, turn the radio on, disconnect the 9 volt, and flip the switch to on so that the memory is powered from the camper again.