Instructables

Soda Can Hinge Wallet Chain!!

Featured
Picture of Soda Can Hinge Wallet Chain!!
Make a (Semi)quick wallet chain out of hinges found at the top of every soda can! Finally a good use for those lonely hinges!!
 
Remove these adsRemove these ads by Signing Up

Step 2: Starting Off...

DSCN0347.JPG
DSCN0337.JPG
-To start off, first cut the bottom section of every hinge. You will have to do this to EVERY hinge.(See First Picture) I am going to label the top hole "Top Hole" and the bottom hole, "Bottom hole"

-After that's done,(See Second Picture) get the key ring and feed the key ring through the top hole of one hinge. (See Third Picture)

-Then keep adding hinges to bottom hole of this single hinge. This is the only single one you will have. (See Fourth Picture)

-After you have added 4 hinges, add 4 more to those bottom 4, and so on.. creating a 4 X 4 pattern.(See Last Picture)
Ya know if you cut the thin part of the tab it's easier and just as strong. Just flip the tab.
evilmadcow2 years ago
SWEET!!!
tazsapp2 years ago
@ColdSpooky i've actually put a carrabiner on the front part of the chain. its a lot easier to put on, but i leave the key ring and clip on in the back. that just tends to take a long time on it's own lol
tazsapp3 years ago
can you use carabiners instead of the clip and key chain?
ColdSpooky (author)  tazsapp2 years ago
Your more than welcome to..actually, I don't know why I didn't think of that.
ashwinlit2 years ago
Uhm I have got a question.. well when you have made a little cut to connect the pop tabs together, what is the best way to put them back nicely like there have never bin a cut before?
ColdSpooky (author)  ashwinlit2 years ago
you can try soldering. but besides that, i doesn't really matter because it VERY sturdy.. I posted this in 08...and my chain has not broken yet.
well since theres more than one for each link, it seems to block the escape pretty well
HAHA my friend makes a chain the exact way but his is 20 meters long O_O
Logan Cade5 years ago
sweet. you could collect one hinge or two from your friends and it would be like a friendship chain.
ColdSpooky (author)  Logan Cade3 years ago
you can probably get one from ALL your friends. how about that?
corsi5 years ago
see i found it easyer to have the cuts going the other way. that way you don`t have to oppen all 4 to put more on. this way you can take the one you are putting on, have the cut open and put it on the previous 4. you see what i am getting at or am i just freakin out of my mind?
ColdSpooky (author)  corsi3 years ago
you can do that but its not gonna be as strong as mine. Mine is actually pretty hard to break.
You might be. I don't really get what you saying, could you put up a picture?
PastTheVoid4 years ago
This is not semi-quick, it's only that way if you go to one of those post-recycling places and get the tabs from there. If you're getting yours like I am, family, it takes forever. Reason: My dad drinks soda with the more square tabs the most.
ColdSpooky (author)  PastTheVoid3 years ago
I got them from my neighbor. He collects cans. I took me one hour to find all of the ones seen in the picture.
a nail clipper will work easier
ColdSpooky (author)  vandamfan12343 years ago
sure..i haven't tried that.
What happens if i have more of those rockstar hinges than regulars (my dad's favorite drink).
ColdSpooky (author)  Yerboogieman3 years ago
you can use a clip to add them for a little flourish. If they have both holes open then go right ahead and use those. Also, after you make one, you'll be amazed at it's strength and durability. Its very hard to break it.
I thought thet were called pop tabs rather than hinges like on a box. learn somethin new everyday
Huntereich4 years ago
Dude thats amazing!!!!!
Just made one, didn't take long to make, but a long time to collect the tops. Since October 3rd.
this is cool, but i never got the point of these
When someone tries to pick pocket.
 OOOOOHHHHHHHHH.
I was wondering why it looked so thick. Is it strong enough for other uses as well? Great instructable.
valley cat4 years ago
Epic idea man, got a lotta soda and free time on my hands.I really appreciate it, thanks!!!Looks cool!!
Mattrox5 years ago
very cool you could sell those.
Yes but no one would buy them, because they'd make their own. XD By the way, nice Instructable.
i disagree most people would not bother ???XD???
ya i could make a lot of things ppl buy
were you asking what XD was. XD turn your head to the left, it was a laughing face.
Sorry im blonde lol
'tis ok. We all still love you.
True, Very, very true. Well, I would.
mg0930mg5 years ago
I'm making one, and for decoration, it will have every energy tab I find and add it on... I have two so far.
DRADIS5 years ago
I made one of these and now it's over 7 feet long, I just keep adding tabs
Jason Ray5 years ago
Pretty cool and a very good idea! By the way, how long did it take you to drink all that?! Keep it up.
shantaram5 years ago
ehehhe recyle reinvent great
BITE.bmp
Pro

Get More Out of Instructables

Already have an Account?

close

PDF Downloads
As a Pro member, you will gain access to download any Instructable in the PDF format. You also have the ability to customize your PDF download.

Upgrade to Pro today!