With Instructables you can share what you make with the world and tap into an ever-growing community of creative experts.
This is a step by step to know how to make a cool can holder. I'm a student and must of the time we need energy drink, soda and beer during the work. ...
The material you will need: 1- Polyethylene plastic sheet (1/16") 4"x14" 2- 4"x 4" Blue Foam (1,5") 1- 4"x 4" Blue Foam (3/4") 1- Hotglue 1- Can (yo...
Here is the patern with measures. Print it or trace it the right size to fit with with the measures.
Trace the pattern on the foam and the plastic sheet.
Cut the excess of material by removing big parts. Follow the pattern not to cut to much material. For the center, try your best. Cut way inside the li...
Tips: Use the can to align the foams rings together. Use the hotglue and be quick to ensure a good fix.
Sand the inside and outside of the the foam. Tips: Use a wood piece to hold your sand paper. Also, place the foam on the border of a table while you...
Use the heat gun and a table border to fold the plastic sheet on the two lines. Be careful with the heat gun. Ajust the interior of the circle with s...
Glue the plastic sheet with the foam core. Use the can to align the mounting. ENJOY!!!!
Remove these ads by
Signing Up
Not NiceInappropriateSpam
PDF Downloads
As a Pro member, you will gain access to download any Instructable in the PDF format.
You also have the ability to customize your PDF download.
Visit Our Store »
Go Pro Today »