Introduction: Canned Finger

Picture of Canned Finger

Alright here is a great April Fools Day prank for those of us with over protective mothers.

Here is what you will need;

1 Lid from a tuna can
a red sharpie
Tin snips
clear drying glue
red paint

This project is extreme because of the extreme worry and anger that your mom will experience when you use this in front of her.

CAUTION: This instructable involves thin sharp peices of metal.  I am in no way responsible for injury that may accure while building or using this. 

Step 1: Measure

Picture of Measure

Take your red sharpie and mark the width of your finger on the edge of your lid.

Step 2: Cut

Picture of Cut

Use your tin snips and cut on the inside of each of your lines, about half an inch in.

Step 3: Fold

Picture of Fold

Fold the flap toward the center and crimpin place(you can use pliers if you want to).

Step 4: Glue

Picture of Glue

Take your glue and apply it on the inside of your cut.  This is very important because it is what prevents your hand from being cut open, so apply liberally and allow it to dry.

Step 5: Try It On

Picture of Try It On

Slip it on your finger and see how it looks.  Take some red aint and apply it around the your finger so it looks real. (you can make the paint look more like blood if you want i used i had) Enjoy!!!

Comments

darn, im fresh out of red "aint"

earthcruiser (author)2012-03-12

Thats sick

ababbtx450 (author)earthcruiser2012-03-12

Thank You, Thank You very much.

agis68 (author)ababbtx4502012-04-10

hahaha!....a prank is always a prank...and this is a good one

hwaranghaw (author)2012-03-08

good idea, i like it :)

ababbtx450 (author)hwaranghaw2012-03-09

Thanks!

About This Instructable

1,116views

1favorite

License:

More by ababbtx450:Canned Finger
Add instructable to: