Canon PowerShot SD750 Button Board Replacement


Introduction: Canon PowerShot SD750 Button Board Replacement

My brother's camera got chewed by his german shepherd, and dropped in the water.
The round button board that is used for scrolling through pictures was stuck scrolling.
Attempted to dry and clean the unit to no avail.
Found a replacement board on e-bay and replaced it.
These are the step by step instructions on how to do it.

This is my first posting, so flame on.

Assembly is the reverse of the removal.

Check out my blog for random network scripting stuff. Http://

Step 1: Required Items

I found the button board on e-bay.

Step 2: Screw Locations

Note the screw colors. Black on black, silver on silver.

Step 3: Taking Off Covers

Dont force anything. If its not pulling out, look around and double check all tabs.

Step 4: Button Board Removal

Here is a schmorgage board of pictures



    • Clocks Contest

      Clocks Contest
    • Casting Contest

      Casting Contest
    • Woodworking Contest

      Woodworking Contest

    We have a be nice policy.
    Please be positive and constructive.




    This is a great Instructable, but you need to add a main image of the final project to the intro step. Please do that and leave me a message when you have so that we can publish your work. Thanks!

    The snack is the most important...well, what was leftover from the snack. :P

    Best thing ever! Great job, Papa! You should add more things. :D :P