Introduction: Capacitor Earrings

F' a rad earring collection, try making these in various colors and configurations. Nerdy conduct only, please!
They will charge you up throughout the day.

Step 1: Materials

2 capacitors
needle nose pliers

Step 2: Make a Loop

Make a loop in the short end of the wire.

Step 3: Bend It Out

Bend the loop outwards from the other wire so that it is orthogonal to its original position.

Step 4: Make the Ear Wire

Bend the longer part around and over as an ear wire. It fastens as the end of the wire goes through the loop.

Ta-da!

Comments

author
GameVortexGeck0 (author)2012-03-15

WARNING: If you build earrings out of electronic components, make sure that they don't have lead in them or on them. Look for components that are ROHS-compliant and don't recycle components that have been soldered, as most solder is primarily made of lead.

author
ilpug (author)2012-03-08

Geek fashion! Me likey.

author
barefootbohemian (author)2012-03-08

I love re-purposing old electric components and computer junk. Good job!

author
killerjackalope (author)2012-03-07

Reminds me of using an LED as an earring, couldn't find anything to stick in it for my amusement...

About This Instructable

1,047views

3favorites

License:

Bio: An engineer, seamstress, cook, coder, and overall maker. Spent a summer at Instructables; got a degree in E: Neural Engineering at Olin College; made a ... More »
More by SelkeyMoonbeam:How to Build a Cabin Foundation in a Remote LocationOrienteering Using a Thumb CompassHow to Pack Hangers
Add instructable to: