Step 4: The Relay Part One
Now its time for the DPDT relay to find its place on the board.
It will have the role of controlling both LEDs. It will have to switch one ON and the other one OFF.
Along with it place the 1k resistors near to the rear outputs of the relay as they are the ones who will keep the LEDs from burning at 12v.
It will have the role of controlling both LEDs. It will have to switch one ON and the other one OFF.
Along with it place the 1k resistors near to the rear outputs of the relay as they are the ones who will keep the LEDs from burning at 12v.
Remove these ads by
Signing UpFlag this comment as:
Not NiceInappropriateSpam
Visit Our Store »
Go Pro Today »
