Introduction: Card Shelf

Picture of Card Shelf

A really tiny shelf made from a playing card to hold your chewbaccas and stuff

Step 1: Get Ingredients

Picture of Get Ingredients

You need a playing card and some tape. Chewbacca is optional.

Step 2: Measure Tape

Make two strands of tape, both about the same size. Then, make two more strands of tape a bit smaller then the first two. My big tape things were about 8 and a half inches long, as my small ones were 7 inches long

Step 3: Tape Tape

Lay the longer strips of tape down (sticky side up) and lay the smaller strip of tape in the middle (sticky side down). There should be a piece of tape with only the edges sticky. Do that with the other one too.

Step 4: Tape Tape to Card

Picture of Tape Tape to Card

Tape one of the sides of the special tape you made to the card, so it looks like this

Step 5: Hang

Picture of Hang

Now all you have to do is hang this shelf up. Put something light on it. These lego guys seem to do the trick

Comments

craftclarity (author)2014-07-01

They're like Lego Mini-Figure Magic Cardpets!
(Okay, not the funniest joke ever...Cool idea tho!)

About This Instructable

399views

0favorites

License:

More by Yummyfoods1:Card Shelf
Add instructable to: