Instructables
Picture of CardBoard Snowperson!
Easy to build Cardboard Snowperson. 
 
Remove these adsRemove these ads by Signing Up

Step 1: Layout

Picture of Layout
2012-11-15_17-33-15_992.jpg
2012-11-15_17-34-27_472.jpg
After getting cutting out my model made with 123D Make, I like to lay everything out with the Glue I will need for the project. For this project I used white cardboard that I got from Uline.com  and a laser Cutter from TechShop. 

Step 2: Set-up

Picture of Set-up
Then I stack starting with a number in the middle range, one pile forward one back. This makes the process go much faster. 

Step 3: The Hat

Picture of The Hat
After my person is glued up and ready to go, I then work on the Hat. Those are the pieces that are labeled with the "H" by the number.

Step 4: Sticky Business

Picture of Sticky Business
Then I hot glue the hat to the head and boom, snowperson.