Print PDF
Favorite
Email
Step 8Make a hole.
In the original instructions the step just said.. "Make a Hole for the exhausts and spoilers"
Heres what you need to do.
The two exhausts go on the rear of the box. So use a sharpie to draw around the end of the toilet roll exhausts where they will go.
The two spoilers go on the sides at the front and again draw the shape.
Using a really sharp craft knife score into the cardboard to remove the first layer of carboard down to the flaps ( now you see why you left them ) . Needless to say this is the job for the Adult.
Remember to cut INSIDE the sharpie marking in order to ensure a tight fit to push the tubes into.
Once you fit the tubes go around the join with the Glue gun to ensure they stay put.
Heres what you need to do.
The two exhausts go on the rear of the box. So use a sharpie to draw around the end of the toilet roll exhausts where they will go.
The two spoilers go on the sides at the front and again draw the shape.
Using a really sharp craft knife score into the cardboard to remove the first layer of carboard down to the flaps ( now you see why you left them ) . Needless to say this is the job for the Adult.
Remember to cut INSIDE the sharpie marking in order to ensure a tight fit to push the tubes into.
Once you fit the tubes go around the join with the Glue gun to ensure they stay put.
| « Previous Step | Download PDFView All Steps | Next Step » |
 |
Add Comment
|
