Introduction: Cardboard Model Vehicle
How to make a cardboard model vehicle on a laser cutter also this is my first instructable so sorry if it is not very good.
Step 1: Things You Will Need
Appropriate software ( I used Techsoft 2D design ),
2mm thick cardboard sheet ( although you could make this out of acrylic or wood),
multiple paper clips,
needle nosed pliers,
inner tubing of a Biro,
Step 2: Copy Across Design
Copy the design and then cut it out on the laser cutter.
Step 3: Assemble
Follow the pictures on what to do here.
We have a be nice policy.
Please be positive and constructive.