Instructables

The Seriously Cool Way To Make A Clownfish Costume!

Step 5: Making the Nose and Tail

Picture of Making the Nose and Tail
DSC02795.JPG
Nose:
Using the Ruler and Pencil draw a rectangle 34” x 20”
Using the Utility Knife cut out the rectangle, and hold in a landscape position.
Using the Pencil draw a line 4” from both the top and bottom in the center of the rectangle. Then, connect the edges of the rectangle to the line.
Using the Utility Knife cut out the triangular shapes along the lines.
Using the Utility Knife cut a slot 2” from both edges down from the top 10.5”
Fold along the centerline.

Tail:
Repeat the steps for the nose.
Using the Utility Knife (T2) cut a line along the fold from the top 4”.
 
 
Remove these adsRemove these ads by Signing Up